當前位置：深圳德隆泰科技有限公司>>閥門>>TYCO keystone蝶閥>>GRINNELL VALVES 格林奈爾蝶閥, 格林奈爾手動（電動/氣動）蝶閥

GRINNELL VALVES 格林奈爾蝶閥, 格林奈爾手動（電動/氣動）蝶閥

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號WC-8100，GHP

品牌

廠商性質經銷商

所在地深圳市

在線詢價 收藏產品查看聯系電話

聯系方式：付先生查看聯系方式

更新時間：2016-08-25 19:46:45瀏覽次數：374次

聯系我時，請告知來自泵閥商務網

產品分類 品牌分類

  閥門

KEYSTONE閥座

+GF+ 球閥

+GF+ 蝶閥

TYCO球閥

TYCO keystone蝶閥

全部產品列表

暫無信息

深圳德隆泰科技有限公司

經營模式：經銷商

商鋪產品：63條

所在地區：廣東深圳市

聯系人：付先生（銷售人員）

詢價 給他留言

產品簡介

Grinnell格林奈爾是工業、商業和建筑市場閥門的*制造商。
Grinnell格林奈爾閥門采用的加工設備生產。每個閥門在出廠前都經過110%的打壓測試，確保每一個閥門的安全可靠。
現貨供應GIRNNELL VALVES 美國格林奈爾光桿蝶閥，氣動蝶閥，現貨口徑有：DN80mm,DN100mm,DN150mm等規格

詳細介紹

GRINNELL VALVES 格林奈爾蝶閥, 格林奈爾手動（電動/氣動）蝶閥，格林奈爾蝶閥代理

簡單介紹

GRINNELL VALVES 格林奈爾蝶閥，格林奈爾閥門，1000系列，8000系列，WC-8100，GHP系列GRINNELL VALVES 格林奈爾蝶閥（現貨）

GRINNELL VALVES 格林奈爾蝶閥（現貨）

的詳細介紹

GRINNELL VALVES 格林奈爾蝶閥 GRINNELL VALVES 格林奈爾蝶閥（現貨）
主要包括1000，8000，GHP三大系列

歡迎來到Grinnell閥門公司

Grinnell格林奈爾是工業、商業和建筑市場閥門的制造商。

Grinnell格林奈爾閥門采用的加工設備生產。每個閥門在出廠前都經過110%的打壓測試，確保每一個閥門的安全可靠。
現貨供應GIRNNELL VALVES 美國格林奈爾光桿蝶閥，氣動蝶閥，現貨口徑有：DN80mm,DN100mm,DN150mm等規格。
型號為：
GRINNELL 080 WC-8100/6G/AN150
GRINNELL 100 WC-8100/6G/AN150
GRINNELL 150 WC-8100/6G/AN150

Series 1000 Resilient Seated Butterfly Valves

BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.

STEM/DISC
Stern design provides high strength and positive disc control with standardized end connection for operator interchangeability.

STEM BEARINGS
Bearings are standard on both the upper and lower shaft to minimize torque and provide maximum stern support.

SEAT
Molded-in resilient seat provides bubble-tight shutoff to 250 psi.

Dead-End Service
The lugged body is drilled and tapped for isolation and removal of downstream piping at full rated pressure.

TESTING
Each valve is individually tested for bubble-tight closure at 110% of full rated pressure.

Series 1000 Drawings

PDF

Wafer Barestem
Wafer Lever Operated
Wafer Gear Operated

Lug Barestem
Lug Lever Operated
Lug Gear Operated

Series 8000 Resilient Seated Butterfly Valves

BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.

STEMS
Heavy-duty, two-piece design allows for easy maintenance. Stems are secured by the use of retaining pins.

BEARINGS
Two bronze or Teflon^®* bearings are standard on 2"-12". Sizes above 12" have full-length bearings on upper and lower stems.

Stem/Disc Attachment
Rectangular drive ensures proper disc connection. No pins or bolts are exposed to flow.

Seat
Elastomer, reinforced with phenolic backing ring, enables valve to be used on pressure or vacuum service. Seat can be field replaced. Grinnell's special double seal design eliminates the need for flange gaskets. Three stem seal O-rings are molded into the the seat liner to back up the primary stem seal.

DISC
Streamlined for maximum flow and minimum seat wear. Ease of maintenance due to the elimination of bolts, pins, etc., as disc to stem connectors.

Dead-End Service
A unique patented lip, integral to the body prevents the liner from moving downstream, eliminating seat and flange leakage. This feature allows lug valve to be used in uni-directional, dead-end service applications at full rated pressure without the use of downstream flange.

* Teflon^® is a registered trademark of the E.I. DuPont de Neymour Company

其他推薦產品更多>>