當前位置：廣州阿泰克閥門有限公司>>閥門>>疏水閥>>進口疏水閥

進口疏水閥

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號LIK

品牌

廠商性質經銷商

所在地廣州市

在線詢價收藏產品查看聯系電話

聯系方式：孫生查看聯系方式

更新時間：2017-07-17 03:52:47瀏覽次數：403次

聯系我時，請告知來自泵閥商務網

產品分類 品牌分類

  閥門

減壓閥

安全閥

止回閥

角座閥

針型閥

截止閥

過濾器

阻火器

呼吸閥

閘閥

隔膜閥

平衡閥

疏水閥

電磁閥

全部產品列表

暫無信息

廣州阿泰克閥門有限公司

經營模式：經銷商

商鋪產品：199條

所在地區：廣東廣州市

聯系人：孫生（銷售經理）

詢價 給他留言

產品簡介

萊克生產的進口疏水閥，驅動方式可選用自動，連接方式可選用法蘭、焊接、內螺紋，結構形式可選用硬密封，密封結構可選用，壓力范圍PN0MPa-100MPa，公稱通徑為15-500mm，材質可選用不銹鋼（304、316、316L）、鑄鋼。由于閥門的使用范圍非常的廣泛，同一種閥門在不同的場合與工況有不同的搭配，如果您是非專業人士，歡迎您向本公司。

詳細介紹

Performance / Advantages:
■ Continues discharging saturation condensed water without accumulation, and so get the maximum thermal efficiency.
■ When steam pressure changes, the ball float can adjust the opening of valve seat without influence, and so it is stable.
■ With automatic and manual releaser, and so its exhaust performance is good without airlock and working is smooth without noise.

Application:
By automation, speediness and continuing features, this valve is used for the steam heating equipment, condensation water recovery system and the place where needs removing condensation water at quick speed, and so stop steam leakage effectively and obtain optimum heating.

Working Principle:
By the action of buoyancy, the position of floating ball changes with the water level of condensation water and adjust the opening of valve seat automatically, continue to discharge condensation water, when the condensation water stops, the floating ball fall onto bottom by gravity, then close opening of drain valve. The opening of drain valve is below the water lever, and so the water is separated from steam automatically, and form water seal without steam leakage.

Performance Parameter/ Material List of Main Part:

Mini Working Pressure	0.01Mpa	Maxi allowable temperature for cast steel	42 5 ℃
Mini degree of super cooling	≈ 0 ℃	Maxi allowable temperature for stainless steel	525 ℃
Leakage rate with loading	≈ 0	Working Medium	Saturated vapor, condensed water
Maxi allowable rate of back pressure	80%	Exhaust plant	Stainless steel / alloy
Valve body, cap	WCB / 304	Floating ball	Stainless steel
Valve seat	2Cr13 / 304	Filter	Stainless steel

Main Basis for Type Selection:
■ Condensation water loading (discharge)kg/h (select the multiplying power 2~3 times).
■ Maximum working pressure Mpa
■ Operation pressure differential
■ Valve material and nominal pressure
■ Connection mode and dimension

Use and Maintenance:
■ Confirm the valve material, pressure and check if the maximum is suitable for operation condition.
■ Before installation, clean the pipeline and clear away sundries.
■ The installation position shall be closed to heating equipment as much as possible.
■ Install the minimum point of pipe horizontally and the direction of flow should be the same to the label of valve.
■ Install steam trap for each heating equipment in case cause influence each other.
■ under the safe operation of system, open the valve in front of the steam trap, make it rise up to normal station slowly.
■ Do time-based maintenance for the normal working of steam trap.